Saturday, November 26, 2011

Base Stop Motion ReDriven Wind Turbine

Posted by at

3 comments:

  1. Windy21November 27, 2011 at 11:59 AM

    It is a smart way, but under windy conditions or otherwise unstable situations, when landing on the support pole, the pin on the support pole has to be locked in place. It is not safe to rely on its weight, only.

    Posted by Mojtaba

    ReplyDelete
  2. Windy21November 27, 2011 at 11:59 AM

    This is the same tower as SWG is producing
    Mojtaba is right
    Never lower or rise the tower when there is wind
    But this is with all towers a bad idee , lowering when there is wind

    Posted by cor

    ReplyDelete
  3. Windy21November 28, 2011 at 10:17 AM

    A more broad consideration in designing rigging systems/devices is that a redundancy is required, to prevent substantial failures. All the modes of failure need to be defined and associated risks quantified. This way the allocation of expenditure on redundancies can be optimized.

    Posted by Mojtaba

    ReplyDelete

Subscribe to: Post Comments (Atom)